I-Rod | Still Performing After 28 Years Offshore
Written by Anode Engineering on Jun 28, 2018
In1989 the first order of half-round I-Rod thermoplastic was installed to supportpiping on an offshore platform in the Gulf of Mexico.
As part of routine inspections, Deepwater Corrosion Services visited the platform in 2002 and again in 2017.
Copperhead, Barramundi, Scorpion - Outback Critters? No, Permanent Reference Cells
Written by Anode Engineering on Mar 06, 2017
Anode Engineering manufacture their own range of permanent reference cells. Sometimes called reference electrodes, these specially designed electro chemical cells are designed with a reproducible potential, allowing it to be used as a reference point for measuring the difference between two metal / electrode voltages.
Anode Engineering and Lordco Equipment Calibration and Service
Written by Anode Engineering on Mar 01, 2017
Anode Engineering and Linetech undertake an Electro Magnetic Interference Study
Written by Anode Engineering on Dec 08, 2016
The Anode Engineering and Linetech teams often work together to undertake work where both teams' skills intersect. One of the many occasions recently was for an Australian pipeline owner. Dr Tony Auditore from Linetech and Ross Darrigan from Anode Engineering were contracted to undertake an Electro Magnetic Interference (EMI) study.
Australasian Corrosion Association’s 2016 Conference
Written by Anode Engineering on Nov 21, 2016
Anode Engineering has been attending the Australasian Corrosion Association’s annual conference for the past 14 years, while Technical Director, Wayne Burns, has been attending for over 40 years.
With Lordco, Anode’s New Zealand based subsidiary, Anode was able to make many new friends, establish business contacts and showcase the latest in Cathodic protection systems and services along with a multitude of other related engineering systems.
Anode Engineering Passes its Bi-annual Achilles Audit
Written by Anode Engineering on Oct 18, 2016
In the asset integrity industry, in particular the Oil and Gas sector, compliance to various standards, regulatory or otherwise is a critical part of supplier pre-qualification.
Anode Engineering at the Australasian Pipeline and Gas Association conference
Written by Anode Engineering on Oct 17, 2016
Anode Engineering have been a member
of the Australasian Pipeline and Gas Association since its inception and been
exhibiting at the annual conference since. This year the conference was
held in Perth and all indications point to it being an unbridled success.
Corrosion Monitoring in Marine Environments
Written by Anode Engineering on Oct 05, 2016
On the 28th September, Wayne Thomson, Managing Director of Anode Engineering, gave a presentation on Corrosion Monitoring in the marine environment to the Australasian Corrosion Association Auckland Division. New Zealand has the fourth largest Exclusive Economic Zone in the world courtesy of its extensive coastline and islands...
Introducing Ross Darrigan
Written by Wayne Thomson on Sep 02, 2016
Anode Engineering have been operating in the corrosion, pipeline and wider asset integrity industry for many years. We pride ourselves on our quality staff and professional service. In that vein we have appointed Ross Darrigan as National Business Development Manager.
Assessing the Impact of Overhead Power Lines on Pipeline Corrosion
Written by Anode Engineering on Sep 05, 2015
New Pipeline Brush Product Release
Written by Anode Engineering on Aug 29, 2015
Product Spotlight - Electrobraze Pin-Brazing equipment
Written by Gayle Burns on May 27, 2015
Here at Anode Engineering we really do use the products we sell, our engineering team have been busy using the Electrobraze Pin Brazing gun installing surge diverters for some of Australia’s biggest gas pipeline operators in some very remote locations. We have also completed many water and waste-water pipeline test point connections using the Electrobraze system.
The Electrobraze system provides the ability to attach 6, 8, 10 & 12mm threaded pins as well as direct brazing of crimp terminals from 2.5mm² cable right the way up to 120mm² including all the commonly used sizes in between such as 6, 16 & 35mm² cables.
The system comes complete…
New and Improved quote system!
Written by shm@rk on Apr 01, 2015
to our new website! Comprehensive product listing, simple navigation and search functionality, latest news and user friendly quote submissions.
Link Seal - Modular Sealing Technology
Written by Anode Engineering on Feb 27, 2015
Link-Seal modular seals are considered to be the premier method for permanently sealing pipes of any size passing through walls, floors and ceilings. In fact, any cylindrical object may be quickly, easily and permanently sealed, as they pass through barriers, by the patented Link-Seal modular seal design.