LineSeal

The LineSeal gasket uses proprietary materials to address the regulations associated with fugitive emissions, requirements that are closely monitored and highly sensitive to regulatory agencies today.

Extreme, high-reliability sealing and electrical isolation solution for critical service applications.

Seals and isolates all pressure ratings through ANSI 2500 class and API 15,000 psi service.

Withstands severe service conditions including vibration, temperature and pressure fluctuations.

Designed to withstand corrosive environments, including high concentrations of CO2, H2S, produced water and aggressive inhibitors.

Good electrical isolation properties for cathodic protection.

Pressure-activated seals provide high confidence sealing, eliminates costly leaks and provides a solution for fugitive emissions.

Gasket is sized to the bore to protect flange faces from media-induced corrosion and flow-induced erosion.

Prevents turbulent flow at flanged connections.

Mitigates galvanic corrosion in dissimilar metal flanges.

High-strength laminate material resists failure due to excess compression.

Available to match any flange specification (ANSI, ASME, API, MSS, BS, DIN, AS, others).

Can mate mismatched RTJ with raised-face flanges.

Easy installation, make up and removal:

Sealing system is not sensitive to low bolt loads - providing reliable sealing through a range of bolt stress.

Gasket is self-aligning and centering - quick to install and no special tools are required.

Maintenance-free corrosion-resistant design is resistant to deforming under load.

Works in Ring Joint Flanges, reducing fluid entrapment, flow induced erosion and media induced corrosion between flanges.

H2S service.

High pressure flanges.

Critical service applications.

High Ph service.

Locations where one prefers an integral seal element.

Sealing flanges without dissimilar metal contact that occurs with Chevron in spiral-wound type gaskets.